Articles
Vol. 9 No. 2 (2022)
Several Factors Affecting the Inspection of Wind Turbines by UAV
- Gaoming Zhang
- Xingguo Tan
Abstract
The country strongly supports the development of new energy industries, with the clean energy wind power industry developing rapidly and the market maturing, the scale of wind farms and installed capacity expanding, and the blade length increasing to 60-70m. The increased blade length and weight increase the probability of damage. the manual inspection method is time-consuming and laborious, with a high economic cost, low inspection efficiency, and high safety risks, and cannot meet the current wind turbine fast and efficient inspection requirements. This paper intro-duces the characteristics of the type of UAV, its working status, and mode, and proposes how to determine the best area for UAV inspection according to the factors that can cause interference to the inspection in the actual wind field, to achieve the demand for fast and efficient inspection of the blade surface and improve the accuracy of inspection. It is believed that with the development of UAV technology, UAVs will play a more important role in the field of in-spection.
Downloads
Download data is not yet available.
-
Wenjie LI,
Tianhu Wang,
Research on Switching Characteristics Based on Optimization Design of SiC MOSFET Drive Circuit
,
Instrumentation: Vol. 11 No. 2 (2024): Instrumentation Volume 11 Issue 2
-
Long Zhao,
Xin Wang,
Bowen Zhao,
Guiyuan Wu,
Dacheng Luo,
Shaochun Zhang,
Non-destructive Testing Method for Crack Based on Diamond Nitrogen-vacancy Color Center
,
Instrumentation: Vol. 9 No. 1 (2022)
-
Rongxin XING ,
Han WANG ,
Yurong HU,
Liang WEI,
Xiaosong CHEN ,
Yongming WU,
Digital Predistortion and Measurement Method
,
Instrumentation: Vol. 7 No. 2 (2020)
-
Jiahui Chen,
Deren Kong,
Study on the Propagation Law of Shock Wave Pressure in Tunnels with Different Materials
,
Instrumentation: Vol. 9 No. 4 (2022)
-
KHOSHNOUD Farbod ,
BOWEN Christopher R. ,
MARES Cristinel ,
Bistable Piezoelectric Flutter Energy Harvesting with Uncertainty
,
Instrumentation: Vol. 6 No. 1 (2019)
-
RATHNAPALA J.D.C.C,
JAYATHILAKE M.U.B,
RATHNAYAKE R.M.U.K.H.M.K,
SAMARANAYAKE B.G.L.T,
HARISCHANDRA Nalin,
Sensor-less Terrain Estimation and Torque Control of a Wheeled Mobile Robot
,
Instrumentation: Vol. 6 No. 2 (2019)
-
Anqi LI,
Dongxu YE,
SILVA Clarence W. DE ,
MENG Max Q.-H. ,
Convolutional Neural Network-based Leakage Detection of Crude Oil Transmission Pipes
,
Instrumentation: Vol. 6 No. 4 (2019)
-
Jiayi ZHANG ,
Modification of X-ray Generator by Energy Reusing
,
Instrumentation: Vol. 7 No. 1 (2020)
<< < 1 2 3
You may also start an advanced similarity search for this article.