Articles
Vol. 7 No. 2 (2020)
Temperature Control Based on Fuzzy Logic Two-degree-of-freedom Smith Internal Model
-
Submitted
-
February 5, 2024
-
Published
-
2020-06-15
Abstract
According to the characteristics of the large time delay, nonlinearity and the great inertia of temperature control system in biomass pyrolysis reactor, a two-degree-of-freedom Smith internal model controller based on fuzzy control is proposed. Firstly, the mathematical model of the temperature control system is established by using the step response method, and then the two-degree-of-freedom Smith internal model controller is designed, and the good tracking per-formance and disturbance suppression performance can be obtained by designing the set value tracking controller and interference rejection capability. Secondly, the fuzzy control algorithm is used to realize the on-line tuning of the control parameters of the two-degree-of-freedom Smith internal model algorithm. The simulation results show that, compared with the traditional internal model control, fuzzy internal model PID control and two-degree-of-freedom Smith internal model control, the algorithm proposed in this paper improves the influence of lag time on the control system, realizes the separation control of set point tracking and anti-jamming performance and the self-tuning of control parameters, and improves the control performance of the system.
Downloads
Download data is not yet available.
-
Ziwen WANG,
Bing LI,
SILVA Clarence W. DE,
Use of Fuzzy Neural Network in Industrial Sorting of Apples
,
Instrumentation: Vol. 6 No. 4 (2019)
-
ABID Anam ,
HAQ Zia Ul ,
KHAN Muhammad Tahir,
Fault Detection using Negative Selection and Genetic Algorithms
,
Instrumentation: Vol. 6 No. 3 (2019)
-
ABID Anam ,
HAQ Zia Ul ,
KHAN Muhammad Tahir,
Fault Detection using Negative Selection and Genetic Algorithms
,
Instrumentation: Vol. 6 No. 3 (2019)
-
Changfu LIU,
Wenxiang ZHANG,
On-line Chatter Detection Using an Improved Support Vector Machine
,
Instrumentation: Vol. 6 No. 2 (2019)
-
Liguang Zhang,
Ying Liu,
Yuxin Yan,
Yuzhe Zhang,
Shell Casing Size Measurement Method Based on Improved Hough Transform
,
Instrumentation: Vol. 9 No. 3 (2022)
-
Yang ZHAO ,
Tianhu WANG ,
Wenjie LI ,
Qiannian MIAO ,
Yunzhe SHEN ,
Tao HUANG ,
Structural Design of High-precision Positioning System in Weak Signal Environment Based on UWB and IMU Fusion
,
Instrumentation: Vol. 10 No. 2 (2023)
-
Rong WANG ,
Tianhu WANG ,
Design of Intelligent Pension Online Monitoring Sys-tem Under the Environment of Internet of Things
,
Instrumentation: Vol. 10 No. 3 (2023)
-
Weinan Li,
Saixin Shi,
Hongxia Tang,
Liang Chen,
Jiawei Zhang,
Hao Tang,
Jianhua Zhao,
Study on Sealing Characteristics of Sliding Seal Assembly of Aircraft Hydraulic Actuator
,
Instrumentation: Vol. 11 No. 1 (2024)
-
Jiaxin Li,
Fengzhi Dai,
Di Yin,
Peng Lu,
Haokang Wen,
A Method of SSVEP Signal Identification Based on Improved eCAA
,
Instrumentation: Vol. 10 No. 4 (2023)
-
Lichen Shi,
jiahang Guo,
Haitao Wang,
A Precision machining equipment fault diagnosis based on CWT and improved ResNeXt
,
Instrumentation: Vol. 11 No. 2 (2024): Instrumentation Volume 11 Issue 2
<< < 2 3 4 5 6 7 8 9 10 11 > >>
You may also start an advanced similarity search for this article.